While I was detaching and reattaching my xover box from the 3.6's, I noticed that about 40% of the small screws, on both speakers, were loose and needed retightening. I'm assuming the vibration from the sound from the panels loosen them over time. This probably applies to other models besides the 3.6, it might be periodic check from now on.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Tighten your screws !! - KKM 12:21:04 06/30/03 (8)
- Copper flows under pressure - kendo 22:10:44 06/30/03 (0)
- Or ditch the cheesy fuse plate altogether.... - Marc Bratton 19:07:55 06/30/03 (3)
- Re: Or ditch the cheesy fuse plate altogether.... - tireguy 20:03:12 06/30/03 (2)
- Re: Or ditch the cheesy fuse plate altogether.... - andyr 05:18:03 07/3/03 (1)
- Re: Or ditch the cheesy fuse plate altogether.... - tireguy 15:57:11 07/3/03 (0)
- That's good advice - tireguy 16:00:20 06/30/03 (0)
- Re: Tighten your screws !! - DKG 13:09:59 06/30/03 (1)
- Remember the screws on your tonearm, too, even more important! nt - M_Anker 15:42:33 06/30/03 (0)