Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: RE: And we have foil! posted by IEaudiodude on June 25, 2011 at 14:25:31:
All I know is what I can see in this picture:
http://www.indiespinzone.com/mag/mag1.7.html
The foil seems to be the same width on all the sections. Since there are 26 woofer traces and only 6 tweeter traces and 2 supertweeter traces (essentially in series through the tweeter's range), using the same foil for the woofer as for the tweeter would result in a significant impedance variation, e.g., if the supertweeter was 2 ohms, the woofer DCR would (if using the tweeter foil) be 13 ohms and the tweeter + supertweeter DCR 5 ohms. But in a first order series crossover, as used in the 1.7, the summed output remains flat when the impedance of a driver changes, so there's some leeway. We need some measurements!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups Full ThreadTopic - "Here is a mod that Wendell suggested", REALLY - Mart 08:50:17 06/22/11 (102)
- RE: "Here is a mod that Wendell suggested", REALLY - Kirk57 12:11:07 07/22/11 (0)
- RE: "Here is a mod that Wendell suggested", REALLY - JBen 09:24:58 07/23/11 (0)
- RE: "Here is a mod that Wendell suggested", REALLY - IEaudiodude 18:07:48 07/22/11 (0)
- RE: "Here is a mod that Wendell suggested", REALLY - Kirk57 21:07:34 07/24/11 (0)
- RE: "Here is a mod that Wendell suggested", REALLY - hgg 08:10:31 07/3/11 (0)
- RE: "Here is a mod that Wendell suggested", REALLY - gregmacknass2@netzero.com 23:22:51 06/30/11 (2)
- Heard from Wendell - josh358 08:29:36 07/1/11 (0)
- RE: "Here is a mod that Wendell suggested", REALLY - josh358 07:12:18 07/1/11 (0)
- RE: "Here is a mod that Wendell suggested", REALLY - The peleton 12:52:56 06/30/11 (5)
- RE: "Here is a mod that Wendell suggested", REALLY - Kirk57 16:08:39 07/1/11 (0)
- RE: "Here is a mod that Wendell suggested", REALLY - IEaudiodude 14:32:16 06/30/11 (3)
- RE: "Here is a mod that Wendell suggested", REALLY - josh358 15:23:21 06/30/11 (2)
- RE: "Here is a mod that Wendell suggested", REALLY - The peleton 15:24:48 06/30/11 (1)
- RE: "Here is a mod that Wendell suggested", REALLY - josh358 15:48:04 06/30/11 (0)
- Wendell said "VW" not "Beetle". Here's how my "VW" can sound - JBen 16:50:22 06/25/11 (0)
- Source for Aluminum Foil - Hagar - IIIa 10:51:36 06/23/11 (8)
- RE: Source for Aluminum Foil - josh358 13:37:48 06/23/11 (7)
- RE: Source for Aluminum Foil - StephenEC 15:19:16 06/23/11 (6)
- RE: Source for Aluminum Foil - josh358 17:41:27 06/23/11 (4)
- RE: Source for Aluminum Foil - Mart 15:00:34 06/25/11 (2)
- RE: Source for Aluminum Foil - josh358 16:46:09 06/25/11 (1)
- no apologies, necessary - Mart 17:06:50 06/25/11 (0)
- and the mid/woofer run is *much* longer [nt] - wazoo 18:59:41 06/23/11 (0)
- RE: Source for Aluminum Foil - IEaudiodude 15:56:33 06/23/11 (0)
- here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - Mart 07:48:11 06/23/11 (57)
- And we have foil! - josh358 07:43:17 06/25/11 (21)
- Foil for my MGIII's? - MaggiesAndCats 08:37:55 06/27/11 (8)
- RE: Foil for my MGIII's? - josh358 09:16:50 06/27/11 (6)
- RE: Foil for my MGIII's? - Satie 21:45:01 06/27/11 (5)
- RE: Foil for my MGIII's? - josh358 07:06:27 06/28/11 (4)
- RE: Foil for my MGIII's? - Satie 05:00:38 06/30/11 (3)
- RE: Foil for my MGIII's? - josh358 08:10:10 06/30/11 (2)
- RE: Foil for my MGIII's? - Satie 12:12:18 07/1/11 (1)
- RE: Foil for my MGIII's? - josh358 09:17:02 07/3/11 (0)
- RE: Foil for my MGIII's? - IEaudiodude 08:50:02 06/27/11 (0)
- RE: And we have foil! - IEaudiodude 14:25:31 06/25/11 (2)
- RE: And we have foil! - josh358 06/25/1116:41:06 06/25/11 (0)
- RE: And we have foil! - Mart 15:17:41 06/25/11 (0)
- ... and me, speaking for myself, at last - Mart 13:34:05 06/25/11 (6)
- Second attempt - josh358 16:54:31 06/25/11 (2)
- RE: Second attempt - Mart 17:53:00 06/25/11 (1)
- RE: Second attempt - josh358 18:14:41 06/25/11 (0)
- RE: ... and me, speaking for myself, at last - josh358 13:42:03 06/25/11 (2)
- 'kinda' my point _ ‹nt› - Mart 14:08:21 06/25/11 (1)
- RE: 'kinda' my point _ ‹nt› - josh358 16:41:58 06/25/11 (0)
- RE: And we have foil! - IEaudiodude 11:03:10 06/25/11 (1)
- RE: And we have foil! - josh358 11:12:08 06/25/11 (0)
- awesome...but what about the 'Mini-Maggie?' ! -nt - Green Lantern 19:18:30 06/23/11 (5)
- RE: awesome...but what about the 'Mini-Maggie?' ! -nt - SteveFord 19:41:13 06/23/11 (4)
- the sharks have at last tasted the baited waters.. - Green Lantern 23:58:03 06/23/11 (0)
- RE: awesome...but what about the 'Mini-Maggie?' ! -nt - IEaudiodude 19:55:41 06/23/11 (2)
- RE: awesome...but what about the 'Mini-Maggie?' ! -nt - SteveFord 20:07:33 06/23/11 (1)
- RE: awesome...but what about the 'Mini-Maggie?' ! -nt - IEaudiodude 20:29:19 06/23/11 (0)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - josh358 09:25:44 06/23/11 (28)
- RE: Yes J. Lindborg - benie 00:37:29 06/24/11 (1)
- RE: Yes J. Lindborg - josh358 07:55:57 06/24/11 (0)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - Satie 20:59:47 06/23/11 (25)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - josh358 08:09:21 06/24/11 (24)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - JLindborg 00:41:06 06/25/11 (23)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - josh358 06:53:41 06/25/11 (7)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - JLindborg 11:21:23 06/25/11 (6)
- Belay that, I was wrong! - josh358 09:19:21 06/26/11 (4)
- RE: Belay that, I was wrong! - JBen 10:39:46 06/26/11 (3)
- RE: Belay that, I was wrong! - josh358 11:53:32 06/26/11 (2)
- Possible impedance sweep alternative - JBen 13:44:16 06/26/11 (1)
- RE: Possible impedance sweep alternative - josh358 16:58:19 06/26/11 (0)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - josh358 13:42:58 06/25/11 (0)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - tom_gootee 01:36:01 06/25/11 (13)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - josh358 07:03:04 06/25/11 (0)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - JLindborg 02:01:52 06/25/11 (11)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - tom_gootee 02:23:45 06/25/11 (10)
- "If we replaced the wire with foil that had 1/4th the mass and 4X the resistance per inch" ... - andyr 05:09:51 06/25/11 (9)
- RE: "If we replaced the wire with foil that had 1/4th the mass and 4X the resistance per inch" ... - tom_gootee 14:31:29 06/26/11 (8)
- RE: "If we replaced the wire with foil that had 1/4th the mass and 4X the resistance per inch" ... - josh358 09:22:29 06/27/11 (5)
- RE: "If we replaced the wire with foil that had 1/4th the mass and 4X the resistance per inch" ... - tom_gootee 18:42:42 06/30/11 (4)
- Wendell's answer - josh358 11:28:06 07/3/11 (0)
- RE: Wendell's answer - JBen 23:22:13 07/11/11 (0)
- RE: Wendell's answer - josh358 12:17:29 07/12/11 (0)
- RE: Wendell's answer - JBen 12:51:52 07/12/11 (0)
- RE: Wendell's answer - josh358 06:27:23 07/21/11 (0)
- RE: "If we replaced the wire with foil that had 1/4th the mass and 4X the resistance per inch" ... - josh358 09:49:12 07/1/11 (2)
- RE: "If we replaced the wire with foil that had 1/4th the mass and 4X the resistance per inch" ... - tom_gootee 13:51:32 07/2/11 (1)
- RE: "If we replaced the wire with foil that had 1/4th the mass and 4X the resistance per inch" ... - josh358 06:52:04 07/3/11 (0)
- RE: "If we replaced the wire with foil that had 1/4th the mass and 4X the resistance per inch" ... - IEaudiodude 15:06:38 06/26/11 (1)
- RE: "If we replaced the wire with foil that had 1/4th the mass and 4X the resistance per inch" ... - tom_gootee 19:28:41 06/26/11 (0)
- RE: here is a Wendell Diller follow-up on hot-rodding Ferdinand Posche's "VW", REALLY - berni 01:28:28 06/25/11 (0)
- RE: "Here is a mod that Wendell suggested", REALLY - IEaudiodude 07:03:29 06/23/11 (0)
- RE: "Here is a mod that Wendell suggested", REALLY - SteveFord 14:02:23 06/22/11 (0)
- You mean like Eminent Technology does it to from start - Stale 13:05:57 06/22/11 (6)
- RE: You mean like Eminent Technology does it to from start - josh358 07:19:13 06/23/11 (1)
- RE: You mean like Eminent Technology does it to from start - Mart 06:35:25 06/26/11 (0)
- IIRC, ET employs vapor-deposited aluminum - Mart 04:30:34 06/23/11 (0)
- RE: You mean like Eminent Technology does it to from start - garymuffley@fuse.net 13:16:02 06/22/11 (2)
- I don't think so - Stale 19:48:48 06/22/11 (1)
- Surely that patent ran out quite a while back? - David S. 10:21:29 06/23/11 (0)
- I'm game, - johnvb 10:18:40 06/22/11 (8)
- RE: I'm game, - IEaudiodude 21:07:19 06/22/11 (7)
- RE: I'm game, - johnvb 04:33:11 06/23/11 (6)
- RE: I'm game, - Mart 05:07:01 06/23/11 (5)
- RE: I'm game, - johnvb 05:55:52 06/23/11 (0)
- Another Reason for XO Changes? - DaveStL 05:51:16 06/23/11 (1)
- RE: Another Reason for XO Changes? - Dawnrazor 08:08:35 07/2/11 (0)
- RE: I'm game, - berni 05:17:31 06/23/11 (1)
- RE: I'm game, - Mart 05:32:11 06/23/11 (0)
- Tempting! How does one go about it...my wife's kitchen Alcoa? :-)) nt - JBen 09:41:26 06/22/11 (5)
- RE: Tempting! How does one go about it...my wife's kitchen Alcoa? :-)) nt - tom_gootee 14:35:36 06/22/11 (4)
- RE: Tempting! How does one go about it...my wife's kitchen Alcoa? :-)) nt - JLindborg 04:26:59 06/23/11 (0)
- RE: Tempting! How does one go about it...my wife's kitchen Alcoa? :-)) nt - StephenEC 15:36:29 06/22/11 (2)
- RE: Tempting! How does one go about it...my wife's kitchen Alcoa? :-)) nt - Kirk57 07:53:00 06/26/11 (1)
- RE: Tempting! How does one go about it...my wife's kitchen Alcoa? :-)) nt - JBen 08:39:08 06/26/11 (0)
Follow Ups
- RE: And we have foil! - josh358 06/25/1116:41:06 06/25/11 (0)