FS-100 PF hook up data

MagneQuest/Peerless Forum

Welcome! Need support, you got it. Or share your ideas and experiences.

primary side has two wires. one red. one blue.

Red goes to ground
Blue goes to the plate of your tube

The blocking cap must be on the blue leg (to block both the dc voltage and dc current)... i.e., the cap MUST be in btwn the plate of the tube and the "top" (ac high side) (blue lead) of the transformer.
Again, DO NOT put the cap in the bottom (or ground leg) of the transformer as this exposes the transformer to the very high dc voltages from the power supply.

For the secondary hook-ups please see the directions for our FS -030. The FS-100 PF follows the same pattern.

http://www.magnequest.com/030.htm

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

Topic - FS-100 PF hook up data - mqracing 17:48:15 06/28/06 (0)

You can not post to an archived thread.