Hello everyone:eureka. It clicked. Got a design that I am pretty happy with.
It is built on the same exact core size as the FS-100 PF.
Would come in bell end caps just like the outputs.
can be configured for 120 madc, 100 madc, or 80 madc.
calculated L's
120 madc > 60 henries
100 madc > 80 henries
80 madc > 100 henries
calculated DCR is approx 180 ohmscalculated temp rise of approx 20 degrees C
has over 3 pounds of copper wire in it!!!
can support 550 vrms at 30 hertz
has proper mix of ac and dc fluxes
Pricing:$175 each (normal good quality plate choke)
$225 each for our EL (hot rodded) version.
will accept orders for these until July 15th. It will take some time to build and deliver these since we need some special tooling (which we will have to have made) for these.You don't need all the mullah up front to order these. A deposit will put you on the books.
as normal contact me at acrosound at aol dot com or give me a call at 215-288-4816.
thanks all,
mike
This post is made possible by the generous support of people like you and our sponsors:
Topic - proposed FS100 PF plate chokes..... - mqracing 18:21:48 06/19/06 (10)
- addendum: important note about warranties on high voltage iron devices - mqracing 13:14:00 06/22/06 (0)
- other options - Jim Dowdy 07:25:37 06/21/06 (1)
- Re: other options - mqracing 17:19:20 06/21/06 (0)
- Re: proposed FS100 PF plate chokes..... - Doc B. 09:22:58 06/20/06 (0)
- OK but ... - gluca 01:23:03 06/20/06 (2)
- Hi Gianluca ...the EL is the Extra Linear version..(just like - Bas Horneman 02:32:38 06/20/06 (1)
- OH! Did I forget? - gluca 03:35:38 06/20/06 (0)
- Re: proposed FS100 PF plate chokes..... - Ian L 23:11:48 06/19/06 (2)
- Re: proposed FS100 PF plate chokes..... - mqracing 04:26:55 06/20/06 (1)
- VS BAC120 - John Swenson 22:26:02 06/24/06 (0)