Home Amp/Preamp Asylum

Looking for a new Amp or Preamp? If you're after tubes, post over here.

Re: Gain vs. Resistance?

Hi
Impedance is not the major factor in total system loudness. To remove impedance from the equation, compare the old speaker's efficiency (decibels when driven by 2.83 Volts measured at 1 meter distance) with the Maggies.
For example, if your old speaker is 86 db/2.83V and the Maggie spec is 83 db/2.83 V, the system output will be 3 db lower, in spite of the lower impedance.
This whole issue gets mixed up because many manufacturers rate their speaker's efficiency with 1 W input. This can be misleading, because 1 W into 8 ohms is 2.83 V, 1 W into 4 ohms is 2 Volts.
Anyway, Maggies are famous for being power hungry speakers. Unless you currently have old Quads, Stax or Apogee speakers, expect less loudness and less apparent dynamic range. The upside is the Maggie's natural soundstaging and excellent midrange.
take it easy
Carlos


This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Follow Ups Full Thread
Follow Ups
  • Re: Gain vs. Resistance? - Carlos 02/19/0418:53:56 02/19/04 (0)


You can not post to an archived thread.