Home Amp/Preamp Asylum

Looking for a new Amp or Preamp? If you're after tubes, post over here.

RE: Proceed AMP 3 12v trigger problem

When I saw the title of your thread I immediately suspected what your problem would be. The Xantech 599-00 pulsed switching module will work for what you need. You will need to get a pair of 1N4148 diodes and 12V wall wart to supply power to the module per the installation instructions. If you're triggering with a switched outlet, you will need a second wall wart. You can get the diodes at any Radio Shack store (part # 276-1620 or part # 276-1122) or electronics supplier.

Older Classé amps with an RJ12 style remote jack on the rear panel also require a momentary 12V pulse to turn on and turn off. I had planned on starting a thread on this topic of using the Xantech module as a solution for Classé owners. PM me if you need help.




This post is made possible by the generous support of people like you and our sponsors:
  Kimber Kable  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.