Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: Proceed AMP 3 12v trigger problem posted by Valnar on August 8, 2008 at 07:52:21:
When I saw the title of your thread I immediately suspected what your problem would be. The Xantech 599-00 pulsed switching module will work for what you need. You will need to get a pair of 1N4148 diodes and 12V wall wart to supply power to the module per the installation instructions. If you're triggering with a switched outlet, you will need a second wall wart. You can get the diodes at any Radio Shack store (part # 276-1620 or part # 276-1122) or electronics supplier.Older Classé amps with an RJ12 style remote jack on the rear panel also require a momentary 12V pulse to turn on and turn off. I had planned on starting a thread on this topic of using the Xantech module as a solution for Classé owners. PM me if you need help.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Proceed AMP 3 12v trigger problem - Glen B 08/8/0810:39:18 08/8/08 (1)
- RE: Proceed AMP 3 12v trigger problem - Internetmin 14:19:21 04/7/09 (0)
- RE: Proceed AMP 3 12v trigger problem - Internetmin 10:07:45 07/11/09 (0)
- RE: Proceed AMP 3 12v trigger problem - Valnar 13:15:40 08/8/08 (0)