1: I have not tried one myself yet nor is it cheap but ... (13.96)
Posted by AlanPre on 2009-01-08, 19:53:01 (98.222.6.93)
... groovetracer makes a 150 gram weight for Rega arms that it recommends for the Zu/Denon 103. .......

2: RE: going against my gut... ordered a Groovetracer Acrylic Platter this weekend... (13.96)
Posted by TomSV650 on 2011-03-21, 18:46:29 (68.8.253.22)
Good choice. I've had mine a couple years and really like it. I've gone back and forth between the stock platter and the Groovetracer and always come back to Franks platter. It does sound different in .......

3: Do you like the GrooveTracer counterweight? (12.47)
Posted by tubesforever on 2005-12-30, 18:10:16 (171.72.5.226)
What have you listened to on the 700 arm, stock and GrooveTracer? Any others? Reason why I am asking is that I am thinking about buying a GrooveTracer for my Rega project arm. I like that you can alte .......

4: RE: I have no mat. (12.27)
Posted by Travis on 2014-03-04, 10:47:41 (24.224.38.172)
. .......

5: RE: Groovetracer sublplatter upgrade for P3-24 (nt) (11.77)
Posted by Macromusic on 2012-12-19, 23:31:06 (75.233.128.64)
I have a stock RP3, so I have looked into the Groovetracer products, too. I've never heard a negative comment regarding the subplatter, the counterweight, the acrylic or the delrin platter upgrades. I .......

6: Groovetracer Subplatter (11.76)
Posted by hairydog on 2007-08-06, 07:55:56 (12.40.175.147)
Just installed a groovetracer subplatter on my Rega P5. This is an excellent product, very well made. After trying a deep groove (which did not rotate and ruined the brass bearing shaft), I tried the .......

7: Also like that Groovetracer counterweight. Wonder how (11.63)
Posted by alaskahiatt on 2014-11-01, 20:18:53 (66.230.103.172)
that compares to the Expressimo heavyweight? I have seen one post which prefers the Groovetracer. .......

8: Oh wow, Henry, I didn't realize you had tried the Groovetracer Acrylic platter! (11.61)
Posted by VynylTap on 2011-03-21, 08:51:38 (67.197.69.160)
Just kidding, of course, as I know you haven't. I believe you had the Iron Audio, which is about 1/2 the mass of the Groovetracer (39.5oz -vs- 73oz), I believe. I had the same experience with the Iron .......

9: Aftermarket tweaks for Rega P5? (11.57)
Posted by Funky Bob on 2009-06-16, 13:15:10 (75.45.164.231)
Does anyone have experience with these? Would you recommend them? -JA Michell record clamp for Rega -Groovetracer acrylic platter / subplatter Thanks! .......

10: Re: Groovetracer Counterweight for Regas (A Bit Long-Winded!) (11.54)
Posted by Rudy on 2005-10-22, 05:03:06 (24.195.1.85)
What are the email/website contacts for the Groovetracer? .......

11: Re: A different opinion.... (11.45)
Posted by zoltarcat@msn.com on 2005-12-12, 15:52:48 (63.17.153.168)
You might also consider the Groovetracer counterweight. You can get it in different weights, depending on the weight of your cartridge. I liked the Kerry, too. The Groovetracer just does a better job .......

12: The interesting thing is that I can't seem to find anyone who has actually (11.37)
Posted by VynylTap on 2011-03-21, 07:49:44 (67.197.69.160)
tried it and commented on it here to the negative. A search of "groovetracer acrylic" only yields 18 other hits and none of them seem to speak to an individual actually using this specific Groovetrace .......

13: based on what you say i would say go for the GrooveTracer" (11.23)
Posted by OMalley on 2006-03-24, 15:31:50 (68.44.112.122)
where did you get your GrooveTracer? ~Slainte, The OMalley .......

14: RE: Is there any thing noticeably better than my P-25 Rega....... (11.22)
Posted by Travis on 2016-12-11, 11:40:03 (24.72.171.222)
You might try upgrading some of the P25 parts via Groovetracer. I found nice improvements with various upgrades to my RP6 and I didn't have to spend 3-4K. Below is a link to the testimonials page and .......

15: RE: GROOVETRACER™ COUNTERWEIGHT better than stock RB300? (11.19)
Posted by vinyl-addict on 2008-05-02, 11:27:33 (71.131.209.250)
Guy, where did you purchase the Groovetracer counterweight? .......

16: subplatter (11.12)
Posted by samoore on 2011-01-02, 12:38:31 (76.174.67.6)
I am thinking of picking up a Groovetracer subplatter. What were the most obvious improvements that you heard with the Groovetracer? Steve .......

17: RE: Uprade Rega P2 to what? (11.07)
Posted by Aquarium on 2007-10-30, 22:44:17 (58.84.119.88)
There are a couple of more upgrades that you can do to the Rega.Replace the plastic sub-platter with a metal one from Groovetracer http://www.groovetracer.com/.Make the deck suspended by putting it on .......

18: RE: Wow Factor Rega P5 (11.02)
Posted by El Dante on 2010-02-17, 14:26:01 (24.26.148.96)
one word. [url=http://groovetracer.com/]GROOVETRACER[/url] .......

19: Groovetracer rahter than Deepgroove (11.02)
Posted by OMalley on 2007-08-30, 17:26:24 (68.80.124.97)
If you get another subplatter get the one from Groovetracer rather than Deepgroove. There are reported less QC issues with the one's from Groovetracer. But trying a silicon nitride bearing doesn't cos .......

20: Groovetracer acrylic platter for Rega P3? (10.94)
Posted by mrabildgaard@gmail.com on 2008-06-21, 06:53:40 (85.82.156.254)
Hey. I just bought a Rega P3 with a DIY acrylic platter because of this I am thinking about getting the groovetracer acrylic platter. But I have a couple of questions. The platter is twice as thick as .......

21: RE: Latest Rega Planar tweak +1 and (10.93)
Posted by jimel84 on 2014-04-30, 06:14:50 (72.91.199.63)
Groovetracer reference subplatter. Groovetracer counterweight. And last but not least the ubiquitous Rega white belt. .......

22: Agree... (10.90)
Posted by jem on 2008-05-01, 08:29:53 (24.113.5.244)
I have used both, the Groovetracer and the Kerry, and prefer the Kerry for the same resons stated above. The only reason I went to the Groovetracer at all was to get a heavier weight for one of my wei .......

23: RE: Mat.....what mat? (10.70)
Posted by Travis on 2019-04-08, 09:12:13 (24.72.161.172)
I love my GrooveTracer delrin platter on my RP6. This gentleman does extremely fine work and he might be persuaded to make one for the Planar 8. You probably will have to have the sub-platter as well .......

24: Anyone Using The Groovetracer with the Rega RP-6? (10.60)
Posted by dusted on 2013-07-06, 07:39:05 (66.87.151.206)
Anyone currently using the Groovetracer us platter with the Rega RP-6 turntable? If so can you go into detail on the improvements and is it worth it for the price ($280)? .......

25: Groovetracer (10.58)
Posted by OMalley on 2006-09-12, 06:49:32 (65.215.10.1)
Groovetracer makes a better machined subplatter so I am told by someone who was using the DeepGroove. I am using the DeepGroove but the QA is wanting. I got a good one but maybe I was lucky. ~Slainte, .......

26: thanks for the word on that (10.54)
Posted by OMalley on 2006-03-25, 09:49:42 (68.44.112.122)
I have the nad533 with the medite [read mdf] platter. I think the GrooveTracer would be heavier than the stock platter. I was going to get the Iron Audio but now it looks like the GrooveTracer. Thanks .......

27: RE: Groovetracer Subplatter (10.49)
Posted by zoltarcat on 2007-08-06, 14:29:15 (74.237.47.128)
You cannot do better than Groovetracer products. I now own eight subplatters and eight counterweights. I had a couple of Deepgroove subplatters before. They had terrible quality control and I only eve .......

28: Re: based on what you say i would say go for the GrooveTracer" (10.48)
Posted by zoltarcat@msn.com on 2006-03-25, 03:01:55 (65.140.123.90)
If you are happy with your Deepgroove, that is great. Do not look to get rid of it. I just figured that when three out of the four arrived defective in some weird way, it was time to look elsewhere. T .......

29: RE: Groovetracer subplatter..... (10.41)
Posted by hukkfinn on 2009-07-30, 19:58:16 (206.53.153.80)
Well I tried the Groovetracer on my P25. It did not help tremendously. It made bass sound a tiny bit more full and sucked a tiny bit of life out of the music. Still not sure if I'm keeping it. ::: T .......

30: RE: Counterweight problem (10.39)
Posted by jem on 2008-05-25, 07:08:20 (24.113.5.244)
The only counter weight I could find for my RB-700 and 14 gm cartridge is the Groovetracer 150 gm weight. http://www.groovetracer.com/counterweight_groovetracer.htm .......

31: It's cut out to fit over subplatter. (10.27)
Posted by Jay F on 2008-06-21, 07:13:06 (72.95.239.123)
I don't have one, but I understand the groovetracer platter is cut out on one side to accomodate the subplatter. Mr. Groovetracer posts regularly on stevehoffman.tv, and you can find out more than you .......

32: RE: DL-103R added mass (10.27)
Posted by jem on 2007-12-01, 06:12:58 (24.113.7.91)
I had the same problem with the Kerry and a Zu modified DL103. The stock weight is 100g and the Kerry is 115g, so neither would work. The only 2 options I could find are the Michell Tecnoweight and th .......

33: Rega P3-24/Groovetracer Delrin platter? (10.26)
Posted by Jive Turkey on 2013-01-21, 08:14:46 (76.213.201.40)
I bought the Groovetracer Subplatter for mine and have been very happy with it. I'm considering the Delrin platter now, and would like to know what those who have had it for a good while think of it c .......

34: RE: Groovetracer Subplatter (10.22)
Posted by StephenGR12 on 2007-08-06, 09:30:04 (192.104.198.232)
Happy Groovetracer owner here, too. No problems with rotation; more stable than my stock subplatter, which is especially beneficial with warped records. I'd love to say the sound is so much better, bu .......

35: Re: Iron Audio Acrylic Platter on Rega OEM or Deepgroove Subplatter? (10.20)
Posted by zoltarcat@msn.com on 2006-03-24, 01:39:44 (65.141.89.183)
Get the Deepgroove. Better yet, get the Groovetracer subplatter. I will not bore you with a long review, but the two of them made a great difference in the sound. Everything was better. The Groovetrac .......

36: RE: Latest Rega Planar tweak (10.06)
Posted by Jive Turkey on 2014-04-29, 17:00:31 (98.248.197.215)
Recommended tweaks based on my pleasure with the P3-24: Groovetracer subplatter Groovetracer Delrin platter nylon spacers to raise tonearm 1/4" 3" thick Maple Block Raquetballs in furniture cups An .......

37: Re: "heavyweight" counterweights on Rega arms? (10.04)
Posted by zoltarcat@msn.com on 2005-10-30, 15:55:37 (63.17.131.146)
I have owned every one of the weights you listed and a couple of others. The Groovetracer from Promac Machining is better, to me. Up until now, I liked the Kerry F2 the best. The Groovetracer does eve .......

38: Re: Deep Grove Subplatter for Rega (P5) - worth it? (10.03)
Posted by djr33 on 2007-01-14, 18:58:59 (66.41.91.102)
Not my personal experience, but threads here seem to suggest that the deep groove has quality control issues, and what you really want is the Groovetracer version. I did just get his platter, and its .......

39: RE: GROOVETRACER™ COUNTERWEIGHT better than stock RB300? (9.91)
Posted by Guy Debord on 2008-05-02, 02:14:22 (85.147.132.87)
Once upon a time I owned a Rega, and tried both the rb300 and rb250 with both the Michel Technoweight and the groovetracer. And in both cases I totally preferred the Technoweight apart from sounding b .......

40: Re: well i must be lucky (9.81)
Posted by zoltarcat@msn.com on 2006-03-25, 03:10:20 (65.140.123.90)
To be honest, I threw the others out. I could not have sold those to anyone. The one you bought works perfectly. I just heard how the Groovetracer products sound, so I replaced a lot of things. It is .......

41: Re: Be careful (9.63)
Posted by zoltarcat@msn.com on 2006-03-25, 10:19:47 (65.141.89.164)
I had this problem with an aftermarket platter from SRM Tech in England. The Iron Audio platter and the Groovetracer platters are fine when partnered with the Deepgroove. You can get a version of the .......

42: Have you thought about a modified Rega? (9.58)
Posted by derekva on 2006-08-31, 12:56:42 (131.107.0.102)
I've been looking at upgrading my Rega P3 with a few bits and pieces: - Origin Live Motor Upgrade - GrooveTracer SubPlatter / Bearing - GrooveTracer Platter I don't know if this will ever happen (sinc .......

43: RE: rega p5 & acrylic platter (9.56)
Posted by Travis on 2019-03-13, 10:32:09 (24.72.161.172)
I sure do like my GrooveTracer delrin platter. Things are quieter and no need to futz over mats. This guy does real precision work, first class all the way. Looks like he has a P5 special order option .......

44: Re: Rega upgrades (9.42)
Posted by zoltarcat on 2006-09-16, 04:31:09 (74.237.47.128)
The Groovetracer products are the best you can buy, if you want to upgrade your Rega. I am weird and have to try every possible Rega tweak out there. Ha! The Groovetracer line is of the best quality a .......

45: RE: Finally Got A TT (9.37)
Posted by bacobits on 2010-09-18, 07:27:45 (24.74.142.161)
I also have a Rega P5, TTPS and the Groovetracer Sub Platter (Ref Version). With the 10X5 it is the most plug and play Turntable I have ever used provided you are using 2> 2mm shims for a total of 4mm .......

46: RE: Just a few of the reasons I do, too. (9.28)
Posted by Jive Turkey on 2014-07-11, 17:58:17 (24.130.73.86)
As you know, I'm onboard with the Groovetracer upgrades (subplatter, delrin platter in my case). They elevate the performance of my P3-24. I probably would have moved on to another table, matter of fa .......

47: RE: Finally Got A TT (9.25)
Posted by shallow pockets on 2010-09-17, 19:09:44 (67.167.191.175)
I bought a P5 this spring, a mid-life crisis birthday present for myself. The TTPSU followed a few months later, a decent upgrade. Recently purchased the reference subplatter from Groovetracer, that c .......

48: RE: Question about Groove Tracer products (9.23)
Posted by zoltarcat on 2008-06-05, 14:05:52 (74.237.47.128)
I will not make you agonize through all of the usual audio hyperbole. I own Groovetracer counterweights, subplatters and acrylic platters on all of my Rega tables. I own six. I have tried evry Rega tw .......

49: RE: Ortofon OM40 Stylus (9.19)
Posted by zoltarcat on 2008-02-09, 12:02:56 (74.237.47.128)
The platter is the Rega replacement from Groovetracer. It has the Groovetracer subplatter and counterweight. The trough is a Townshend replica, made by another inmate. The arm is an Acoustic Solid ver .......

50: Isokinetik Isosub Rega subplatter (9.15)
Posted by beeah on 2009-10-15, 09:48:20 (128.253.162.10)
Anyone tried one? Just wondering if they're as well-made as the Groovetracer (not to be confused with Deepgroove) subplatters, which I've heard good things about. Isokinetik has a whole line of what a .......

51: RE: Groovetracer acrylic platter for Rega P3? (8.84)
Posted by macezeke on 2008-06-21, 11:28:56 (66.159.78.238)
As Jay stated below, the Groovetracer platter cut on the underside to accommodate the sub-platter. I recently got both the GT platter and the Deluxe sub-platter with the Ruby bearing for my Rega P25. .......

52: If you upgrade your subplatter to a Groovetracer (8.80)
Posted by jimel84 on 2013-04-27, 14:02:54 (72.91.243.252)
model it comes with a longer spindle so that you can use the regular Michell clamp with out any problems. I have had the original Michell clamp for about twenty years or so and when I bought a Rega P5 .......

53: Re: Groovetracer (8.75)
Posted by derekva on 2006-09-12, 12:35:50 (131.107.0.102)
Even though my Planar 3 is the 'backup' system, I'm still lusting after / saving for the Groovetracer subplatter / platter system, especially since I use my 'backup' system for burning LPs to CD. Of c .......

54: RE: Would a $2000 budget... (8.63)
Posted by Erocka2000 on 2012-06-07, 12:40:22 (207.239.116.194)
I'll give it a try. How about a: Rega RP3 - $895 Dynavector 10x5 - $450 Musical Surroundings Phonomena II - $600 That's $1945 retail, which if buying at a dealer should be a little less. The Phonomena .......

55: GROOVETRACER™ COUNTERWEIGHT better than stock RB300? (8.10)
Posted by StylinLP on 2008-04-30, 15:04:26 (162.135.0.6)
Don't you love cutnpaste? I need to upgradith ma RB250 which has been rewired with Incognito cable. Right now its stock plastic stub and counterweight. Ive been skimming the archived and see the lates .......

56: While we're on the subject of 'cheap-assed' turntables... (8.10)
Posted by Ivan303 on 2014-08-22, 08:46:59 (76.220.25.80)
Got the wife's REGA RP6 up and running. This after the third and final motor controller. Must say, never a worry that the folks at Needle Doctor would come through. Spinning disks at the correct spee .......

57: RE: Rega Subplatter upgrade questions (8.02)
Posted by classicalltheway on 2020-09-18, 10:23:28 (205.200.252.153)
Hi, I've tried both the Tango Spinner and the Groovetracer on my RP6. The Tango Spinner developed a divot at the bottom of the spindle where it spun on the bearing. I'm not sure if that's been address .......

58: Re: and what about the acrylic platter (7.93)
Posted by zoltarcat@msn.com on 2006-03-25, 08:45:59 (65.140.123.90)
The Groovetracer acrylic platter is heavier than the Iron Audio. You have to keep in mind that the Rega glass platter is also heavier than the Iron Audio. The motor used is meant to be turning somethi .......

59: RE: Aftermarket tweaks for Rega P5? (7.81)
Posted by macezeke on 2009-06-16, 18:49:15 (68.50.78.7)
Funky Bob, Although I can't speak to how the Groovetracer products would perform on a Rega P5, I can say that on my P25 they made a significant improvement. To my ear, the mids became a lot clearer an .......

60: Follow up on Groovetracer Acrylic platter - P3-24 (7.80)
Posted by VynylTap on 2011-04-01, 12:50:54 (67.197.70.128)
I've had the Groovetracer Acrylic platter for about a week or so now and promised I'd follow up on it. Short and sweet - I don't care for it. Go ahead Opus/Henry, serve me up an extended listening ses .......

61: actually- well thought out (7.75)
Posted by xyyyy on 2011-03-21, 17:47:55 (68.41.186.136)
In VynylTap's case, up now any adjustments he has made to the stock P3-24 have done been well thought out. Upgrades have been within the Rega line. He even 'nailed' the small details by adding the Reg .......

62: RE: Groovetracer sublplatter upgrade for P3-24 (nt) (7.71)
Posted by Jive Turkey on 2012-12-22, 07:28:00 (50.131.3.92)
The copy on the Groovetracer site turns out to be no hype, IMHO. The subtle but sweet differences are noticeable. "Reference - Top of the line in terms of performance. The non resonant interface with .......

63: Groovetracer platter or Boston Audio mat for Rega P1 (7.66)
Posted by Gravedigga on 2009-10-09, 12:06:04 (216.254.121.227)
I just wanted to thank everyone who answered my record cleaning question last week. Since then, I got a GEM Dandy record cleaner which works wonderfully. Anyway, on to my next newbie question: Looking .......

64: The difference to the P7 is the ... (7.55)
Posted by spyderx on 2009-08-10, 21:26:50 (148.87.1.171)
Aluminum machined sub-platter, among other changes. The composite sub-platter on these is typically slightly out of round. I had the exact same issue on my P3/24. I ended up changing my subplatter to .......

65: Groovetracer reference subplatter came this morning. (7.51)
Posted by D Harvey on 2014-01-04, 12:07:33 (71.227.17.27)
My 80's vintage Planar 3 saga continues.... After spending a week getting acquainted with the Linn Adikt cartridge on the table, I have received and installed the Groovetracer reference subplatter. In .......

66: RE: Did you do the Groovetracer subplatter as well? (7.41)
Posted by Travis on 2014-08-12, 06:40:28 (24.142.64.45)
Hell, yeah. I'm all in. .......

67: RE: really liking my.... (7.39)
Posted by Kinger on 2013-02-10, 16:52:06 (75.180.14.111)
Have the Groovetracer, but have yet to pull the trigger on the platter and not sure I will. .......

68: RE: Anyone Using The Groovetracer with the Rega RP-6? (7.32)
Posted by Travis on 2013-07-06, 09:39:35 (24.224.38.26)
This is the only GT on my set. Maybe later. . .......

69: RE: Groovetracer platter or Boston Audio mat for Rega P1 (7.32)
Posted by DumDeDum on 2009-10-09, 12:28:36 (128.104.178.196)
I got the Rega glass platter and the Groovetracer subplatter for my P1. Sure it's overkill for the P1, but they'll both work just fine when I upgrade to a P5. Or maybe I'll keep the P1 as a mono deck .......

70: Great advice! (7.30)
Posted by xyyyy on 2011-01-01, 14:41:20 (68.41.186.136)
All Rega- except.... I do like my Groovetracer Reference subplatter. .......

71: P3-24 and GrooveTracer subplatter (7.25)
Posted by Bob_in_OKC on 2011-08-23, 21:17:12 (70.251.124.20)
It's a bigger upgrade than one might think. .......

72: RE: Rega Tweaks Redux (7.25)
Posted by bacobits on 2011-03-21, 07:36:57 (24.74.142.161)
Ahh, I had a Basis 1400 with an Incognito rewire and Heavy Weight RB300, ATOC9II a Benz Glider Mid output, nice build, but it cannot compare to my Rega P5, 10X5, and Dl103R. Never had the PRAT and she .......

73: RE: You want to maximize contact (7.25)
Posted by Travis on 2016-01-30, 07:27:39 (24.72.171.222)
Delrin platter by GrooveTracer. I do use a record weight. .......

74: RE: Cork mat (7.18)
Posted by Travis on 2019-02-08, 17:00:37 (24.72.161.172)
Never tried one on my Groovetracer delrin platter. Didn't occur to me nor will it. :^) .......

75: RE: subplatter (7.18)
Posted by Brianmch on 2011-01-06, 07:31:20 (69.76.202.200)
There are several threads on the Groovetracer (and other) subplatters on Vinylengine.com. Seems like all users think it was a worthwhile upgrade. .......

76: Groovetracer Counterweight for Regas (A Bit Long-Winded!) (7.11)
Posted by zoltarcat@msn.com on 2005-10-22, 03:02:12 (63.17.192.6)
It has taken a while, but I have finally seen this counterweight being offered for sale on Audiogon. If you are considering a Rega tweak that actually works, you should try this. Yes, there are loads .......

77: Valentine's Day, bless her, will bring (7.04)
Posted by Joe in Seattle on 2007-02-08, 17:42:34 (71.113.102.249)
Rega P5 subplatter from Groovetracer. .......

78: RE: All right, all right.... :) (7.04)
Posted by Travis on 2014-05-14, 07:35:28 (24.224.38.172)
Funky sea, funky dew. GrooveTracer. .......

79: Yes, mats will do the job.... (6.99)
Posted by Jive Turkey on 2013-09-06, 17:02:10 (67.161.62.246)
...no mat used here though. I really like LP's laying directly on the Groovetracer Delrin platter. .......

80: The only suggestion I would have.... (6.97)
Posted by Jive Turkey on 2014-05-22, 17:29:04 (24.130.73.86)
...is replace the platter with the Groovetracer Delrin, and use no mat at all. Sounds great on my lesser Rega. .......

81: RE: Did you do the Groovetracer subplatter as well? (6.91)
Posted by John Elison on 2014-08-11, 19:40:24 (98.23.19.135)
> And while we're at it, would someone please explain why I'm here discussing tweaks and upgrades to my WIFE'S new TT? Because you want her to have the best listening experience possible! Why else? .......

82: Groovetracer sublplatter upgrade for P3-24 (nt) (6.91)
Posted by Jive Turkey on 2012-12-19, 15:01:19 (76.213.201.40)
(nt) .......

83: really liking my.... (6.86)
Posted by Jive Turkey on 2013-02-10, 16:47:13 (50.131.3.92)
....P3-24 with the Groovetracer Reference Subplatter and black Delrin Platter. Well worth the money. .......

84: Technics, I guess, cause... (6.84)
Posted by Jive Turkey on 2015-03-21, 07:49:14 (98.234.102.229)
...I sure am prefering the direct drive Pioneer PLX-1000 over my former Groovetracer/Rega P3-24! .......

85: I switched to the Technoweight (6.78)
Posted by OMalley on 2008-04-30, 16:20:34 (68.45.141.136)
and it improved bass definition a lot. I heard that the Groovetracer is even better. I don`t care much about music. What I like is sounds. ~ Dizzy Gillespie .......

86: Did you do the Groovetracer subplatter as well? (6.72)
Posted by Ivan303 on 2014-08-11, 19:33:54 (76.220.25.80)
Some say it's a bigger upgrade on the RP6 than the Delrin platter. And while we're at it, would someone please explain why I'm here discussing tweaks and upgrades to my WIFE'S new TT? TIA .......

87: Do you have the Groovetracer acrylic platter? (6.72)
Posted by Funky Bob on 2009-07-30, 20:37:01 (75.45.82.14)
Or you are using it with the stock glass platter? Do you have the upgrade TT-PSU on your P5? .......

88: Re: Groovetracer (6.71)
Posted by OMalley on 2006-09-12, 13:23:31 (65.215.10.1)
I think replacing the plinth would absolutely move it out of Regaville. No longer light and rigid if using granite. ~Slainte, The OMalley .......

89: Keep the feet but try- Groovetracer Counterweight for all rega tonearms (6.66)
Posted by limono on 2008-02-23, 16:41:30 (4.229.21.195)
on your Rega RB1000 and report back ASAP .Somebody got to be the first and I'm saving for a cart ;0) Regards, L .......

90: RE: Groovetracer reference subplatter came this morning. (6.66)
Posted by Jive Turkey on 2014-01-05, 08:55:16 (50.131.49.119)
I agree on the subplatter and Delrin platter. Money well spent in my case. .......

91: RE: Delrin mats? (6.66)
Posted by nationalbar on 2018-07-18, 04:30:39 (24.193.91.197)
Groovetracer make Delrin platters for Rega's, I would guess he could do a custom mat as well- give him a call. .......

92: price adjustment- (6.66)
Posted by xyyyy on 2009-08-12, 18:46:54 (68.41.186.205)
I noted Groovetracer sub platters ranged from $189-$259. The top end one is only $250. In today's economy, every dollar counts : ) .......

93: RE: Some advice if you decide to get the Rega. (6.65)
Posted by ecl876 on 2018-11-02, 17:30:58 (208.100.153.221)
The Groovetracer Subplatter does make a difference. I was a sceptic until I tried it. It was one of the few mods I've ever tried where the improvement was immediately audible. And most everyone who's .......

94: That "End of Civilization" Rega table... (6.65)
Posted by Jive Turkey on 2013-11-07, 17:45:48 (50.131.49.119)
....would seriously benefit from some Groovetracer products. Nice batch, Waxxy! .......

95: RE: Groovetracer Subplatter (6.61)
Posted by hairydog on 2007-08-06, 10:32:53 (12.40.175.147)
I put mine on almost right after I got the P5, so can't comment on the exact degree of improvement, It's not something you could easily A/B but there is probably a reason the P7 and P9 use machined st .......

96: Groovetracer subplatter..... (6.59)
Posted by TomSV650 on 2009-07-30, 18:59:26 (72.199.107.163)
There is at least one mod that helps the regas tremendously.....a machined sub platter. It helped my P-5 alot, got rid of the "dry" sound and tightened everything up. The P-7 and P-10 have them also, .......

97: RE: New Rega RP6 TT coming in december? (6.59)
Posted by Erocka2000 on 2011-11-14, 10:13:02 (207.239.116.194)
Yeah, I noticed that after reading some posts. I guess my P5 with Groovetracer ref. sub. will hold it's value a little longer than I thought. ;) .......

98: RE: Never cared for Rega.... (6.59)
Posted by Jive Turkey on 2013-06-28, 18:21:37 (67.161.62.246)
I've really been enjoying my P3-24 since I bought the Groovetracer subplatter and Delrin platter. No mat, nice lively sound. .......

99: RE: Thanks guys.... (6.59)
Posted by Macromusic on 2013-01-21, 15:28:44 (75.233.42.212)
I know...I was looking for a money-back guarantee of satisfaction, too. I hope you let us know how it works out, we'd be very interested in reading your impressions. But then again, I really haven't h .......

100: RE: Aftermarket tweaks for Rega P5? (6.54)
Posted by jimbo900c on 2009-06-16, 18:49:48 (24.236.131.196)
I have a P25 that I have added the Groovetracer subplatter, acrylic platter, and the counterweight. As in most things audio, the changes these tweaks wrought either coincide with your tastes or they d .......

101: Seems the GROOVETRACER is the way to go (6.52)
Posted by StylinLP on 2008-04-30, 23:09:05 (68.230.70.153)
I guess I will try it. Thanks all ____ *Analog fans may be blind-but digital fans are deaf* http://www.flickr.com/photos/82495693@N00/ .......

102: RE: Decisions made! (6.51)
Posted by Jive Turkey on 2013-12-31, 19:01:44 (50.131.49.119)
I have the Groovetracer Delrin platter and top line subplatter on my P3-24. Highly recommended if they also fit the P3. .......

103: RE: Spinning some Peter Gabriel... (6.51)
Posted by Travis on 2020-05-22, 15:02:43 (24.72.161.172)
I solved the platter mat problem. No got one. Just GrooveTracer's delrin platter. More expensive but just the ticket, pace Roy Gandy. .......

104: going against my gut... ordered a Groovetracer Acrylic Platter this weekend... (6.51)
Posted by VynylTap on 2011-03-21, 06:12:27 (67.197.69.160)
I listened to the Iron Audio platter years ago on a P3-2000 and a P25 and came to the conclusion that the glass/felt combo sounded better, so I sold the acrylic platter. Why the hell did I buy another .......

105: RE: better bearing-ball for rega t.t.? (6.51)
Posted by Erocka2000 on 2012-05-09, 06:40:18 (207.239.116.194)
Yeah, I would just wait until you get the Groovetracer reference subplatter. No reason to just get a ball bearing now. .......

106: Yeah, no kidding. (6.51)
Posted by classicalltheway on 2011-12-12, 11:15:16 (142.160.2.66)
The RB700 absolutely made that P5. Seems this RP6 is an RP3 with an aluminum subplatter, probably to compete with Groovetracer. Their other enhancements don't sound all that impressive. Robert Mills : .......

107: RE: Anybody used those mesh pattern mats ? (6.48)
Posted by Jive Turkey on 2013-03-24, 17:30:52 (50.131.3.92)
I haven't tried that. But I could recommend replacing the entire platter with the Groovetracer Delrin, and what the heck, the subplatter too. Really enhanced my P3-24 for me. Forgive me for going over .......

108: RE: Just bought a Pioneer PLX-1000 (SL-1200 replacement) (6.48)
Posted by Jive Turkey on 2015-02-21, 18:01:59 (98.234.102.229)
They say there's a very good chance this deck will be replacing my Groovetracer upgraded Rega P3-24. Time will tell. .......

109: RE: Where can I buy Michael Lim upgrades for my Rega? (6.48)
Posted by Quadzilla on 2016-11-14, 12:37:51 (70.30.69.231)
Thanks. I have a Groovetracer sub-platter, but I want to try a Michael Lim top and bottom plinth stiffener. .......

110: RE: I considered the Dynavector 20x.... (6.44)
Posted by Jive Turkey on 2014-01-06, 08:15:28 (71.149.253.146)
I like my P3-24, Groovetracer, 2M Black table on a three inch thick maple block sitting on raquetballs (in furniture caster cups). .......

111: One good upgrade for the Rega and I'd choose it. (6.42)
Posted by Bob_in_OKC on 2012-03-04, 16:45:21 (108.77.124.91)
The machined metal subplatters available from GrooveTracer and a few others would likely go a long way toward the clarity and background noise issues you hear with the Rega. It certainly helped mine. .......

112: RE: I have no mat. (6.41)
Posted by Travis on 2014-03-03, 15:38:54 (24.224.38.172)
Got the GrooveTracer Delrin platter, along with the sub-platter for my RP6. No mat needed. I never had a no mat TT and so far I'm liking it. .......

113: RE: FYI... (6.39)
Posted by Travis on 2017-11-25, 00:02:41 (199.15.106.251)
You might be right. The GrooveTracer, not really a clamp, more of a weight, just lifts off, it's not screwed down so I don't stop the platter. There are several other things I wish REGA had not done, .......

114: RE: Groovetracer platter or Boston Audio mat for Rega P1 (6.36)
Posted by Gravedigga on 2009-10-09, 13:37:40 (216.254.121.227)
The thing is, I'm not sure my next turntable will be a Rega, so I'm trying to limit how much money I'm putting into it. But $250 or so for better sound for the next two years is not too bad of an inve .......

115: RE: Post pics of your turntables (6.36)
Posted by RJeff on 2010-08-26, 16:52:18 (96.248.93.95)
Rega25 with a new plinth, Groovetracer subplatter and platter, and Expressimo counterweight. Cartridge is the ATOC9MLII. Sorry for the lousy pic. Phone camera isn't great in low light. Jeff ::: TO .......

116: RE: If you had a Rega, (6.31)
Posted by Travis on 2016-01-26, 15:25:15 (24.72.171.222)
then you could get a delrin platter. .......

117: Check out Tone Magazine (6.29)
Posted by RJeff on 2008-06-05, 08:32:01 (69.142.249.106)
Issue #3 has an article about revamping a Rega with Groovetracer. I'm still saving up. .......

118: RE: A timely article for me (6.28)
Posted by Jive Turkey on 2013-08-24, 17:41:27 (67.161.62.246)
Is that a Groovetracer counterweight? I've got their subplatter and black Delrin platter on my P3-24, but not the counterweight. Loving the 2M Black on my setup. .......

119: RE: Rega RP6 is in the house... (6.28)
Posted by Jive Turkey on 2014-08-11, 17:49:13 (24.130.73.86)
"Still not a felt mat kind of guy but so far I've been able to live with it." Groovetracer Delrin platter, no mat. Love it on my lesser Rega. .......

120: RE: I needed 4mm of shim to mount a Benz Glider to my P5 (6.28)
Posted by watercourse on 2012-06-09, 14:42:34 (50.0.88.38)
You can always get a "dropped" counterweight like the Groovetracer or Michell, or Rega's titanium to get more clearance. Or, just put some felt or other material on the bottom of the dustcover to rais .......

121: RE: The Tekton speakers (ordered) and SL-1500C turntable should do it for me. (6.26)
Posted by Travis on 2020-03-16, 14:35:50 (24.72.161.172)
Looks like one of the Lores. I've had mine for several years now. No plans to replace, and, they play clean and loud with 8WPC of ChiFi. I'm just fine with my RP6 tricked out with GrooveTracer mods, j .......

122: GROOVETRACER™ Counterweight for all Rega tonearms (6.26)
Posted by limono on 2007-12-26, 06:01:44 (4.229.120.8)
Anybody already tried this?? Just saw the add on A-gon and I recall seeing threads of improving Rega arms by adding fishing lead weights on both sides of pivot -it seems like this is commercial implem .......

123: RE: I went from the original Oracle Delphi (mid-80s?) with Koetsu Onyx (6.21)
Posted by Travis on 2017-11-19, 20:49:54 (199.15.106.251)
to Rega RP-6 with a bunch of GrooveTracer mods and the Phoenix combo speed controller a few years back and I ain't NEVER goin' back! .......

124: So do I... (6.21)
Posted by astralnavigator on 2009-10-09, 13:55:36 (207.35.190.71)
on my P25 and I tend to agree, athough in combination with the Groovetracer subplatter there is a significant improvement. Overall, though, the single most significant Rega upgrade aside from rewiring .......

125: RE: upgrade path for a Moth Alamo / Rega Planar 2 (6.19)
Posted by xyyyy on 2011-08-04, 17:08:10 (76.20.129.158)
Only two recommended. Both are reversible and can be easily sold or taken up the rega chain. These include: rega stainless steel or even better tungsten counterweight and a groovetracer reference subp .......

126: seems like a good move (6.17)
Posted by trav on 2010-05-08, 10:32:58 (204.246.127.162)
I know lots of folks dislike the aftermarket Rega upgrades, but the Groovetracer subplatter seems to be in keeping with the standard equipment of the P7 and P9. Which counterweight did you get? The R .......

127: RE: Hate to say this, but.. (6.16)
Posted by Theron D on 2010-10-28, 20:05:17 (24.126.60.25)
I'd really like to put my tweaked out Rega P5 / RB700 / Michell Techno weight / Groovetracer Reference Subplatter / 2mm spacer against a stock Rega P9. I'd get one if it's a noticeable difference but .......

128: The real test is... (6.16)
Posted by Bob_in_OKC on 2011-11-19, 09:07:35 (70.251.100.205)
...removing the GrooveTracer subplatter and going back to stock. I once considered selling mine, so I removed it and re-installed the original. Couldn't live with the stock subplatter anymore. The GT .......

129: RE: for whatever reason (6.15)
Posted by Travis on 2016-09-23, 18:05:15 (24.72.171.222)
It's great to be perfect. My take, Rega makes a great, yes, great turntable. I enjoy it immensely every day. I've toned it down with an Eagle and given it the Groovetracer treatment, and you know what .......

130: speking of Delrin.... (6.14)
Posted by Jive Turkey on 2012-12-23, 16:26:19 (50.131.3.92)
"If you want top to bottom performance without adding and subtracting anything, then Delrin is my recommendation." ...which makes me think a bit more about the Delrin platter upgrade from Groovetracer .......

131: RE: This week's equipment purchase. (6.12)
Posted by Jive Turkey on 2013-06-04, 16:54:28 (67.161.62.246)
I'm thinking seriously about the 2M Black on my P3-24, so let us know your listening impressions when ready. I've been running the Bronze for about 700 hrs. I've really liked the sound with the Groove .......

132: RE: Groovetracer reference subplatter came this morning. (6.11)
Posted by bacobits on 2014-01-04, 17:14:32 (24.74.132.167)
That GT sub-platter and bearing is the best upgrade you can give any Rega replacing that cheap phenolic sub. The GT Delrin platter is superb too. Rewire (Incogito) the arm too. Enjoy! .......

133: Like I say above.... (6.11)
Posted by D Harvey on 2014-02-10, 20:15:18 (71.227.17.27)
....this seemed like a fairly gross issue for a hi fidelity system. I seem to be about halfway to killing it, maybe a little better than that. About the system, if you look at my system profile, you' .......

134: RE: Pinging Rega P3 owners (6.11)
Posted by ecl876 on 2021-11-09, 12:31:33 (67.204.159.248)
I have an RP 6. I have all three upgrades. But I think the Exact made the biggest difference. Despite what those say who dislike Rega cartridges, the Exact is a great cartridge in my opinion and much .......

135: Re: "heavyweight" counterweights on Rega arms? (6.11)
Posted by vinyl-addict on 2005-10-30, 16:24:55 (68.120.204.183)
Here is the link for the Groovetracer c'weight. http://cls.audiogon.com/cgi-bin/cls.pl?anlgtnrm&1135049954 .......

136: RE: What is the Weight and dimensions of the Titanium F2? (6.07)
Posted by zoltarcat on 2008-05-02, 01:32:46 (74.237.47.128)
I do not remember whatn the weight of the Kerry is. I do know that Groovetracer has three different weight options, to fit pretty much any need. Remember that changing the end stub in your arm will ch .......

137: RE: The stylus seems to get stuck. It does not skip. (6.07)
Posted by zoltarcat on 2007-07-15, 02:59:33 (74.237.47.128)
It is not like someone accidently bumped the table. It plays the same little bit of music over and over. I did check the arm lifter early on. I also checked to see if my Groovetracer counterweight was .......

138: a problem? (6.07)
Posted by xyyyy on 2009-08-11, 16:47:44 (68.41.186.205)
The P5 is a great table. If you bought it new, you must have gone through an authorized Rega dealer. Have you contacted them about your concerns? Although the Groovetracer subplatter appears to be a .......

139: cool table- post a picture- (6.07)
Posted by xyyyy on 2011-03-21, 15:31:03 (68.41.186.136)
The Groovetracer platter does look really cool! If for any reason you don't like it, they are really easy to sell for not much of a reduction in price. I'd love to see a photo of your gloss black P3-2 .......

140: AH!!!!! Another P5 owner. (6.06)
Posted by jimel84 on 2011-05-23, 17:24:46 (72.91.237.81)
Is that a Groovetracer acrylic platter? I have the Reference subplatter on mine.How does the acrylic platter compare with stock platter and mat? Nice looking system BTW. Bet it sounds as good as it lo .......

141: RE: DL-103R with RB-300 (6.06)
Posted by bacobits on 2011-06-08, 14:21:00 (24.74.142.161)
The DL103R works very well here on my RB700. I use the Groovetracer Counterweight and a Isokinetic 3 gram screw tapped spacer on the cartridge end as mentioned in a TNT audio article awhile ago. This .......

142: RE: Groovetracer Subplatter (6.05)
Posted by Jobman on 2007-08-06, 15:46:49 (65.197.191.5)
I also have the subplatter, acrylic platter and counterweight on my P3. Elevated to sound and performance to where I would have to spend $1500-2000 to get any better. (Although at some point, I know I .......

143: RE: This week's equipment purchase. (6.02)
Posted by Travis on 2013-06-04, 18:06:08 (24.224.38.26)
I'm not a tweaker. I bought the Groovetracer so I could shut the lid. Besides that and the VTA business, I hope I'm done. I'm finding the Black a lot like the Shure Type whatevers I've had over the ye .......

144: Re: Rega upgrades (6.02)
Posted by wsill on 2006-09-15, 17:57:50 (67.191.160.198)
The Groove Tracer Subplatter, and Acrylic platter are exceptional. I recently purchased (August 2006) the Subplatter with Sapphire, and the Acrylic platter. I have had my Rega 25 for about 2 years, I .......

145: RE: Ortofon 2M Black? Had one. A bit too polite for my tastes, system. /nt\ (6.01)
Posted by Jive Turkey on 2014-02-22, 17:35:49 (98.248.197.215)
I agree. The Black on my P3-24 sounds fantastic. I don't find anything about the Black to critique. I'm a big fan of the Groovetracer Delrin platter, and their subplatter as well. .......

146: I leave the top down. (5.99)
Posted by Travis on 2016-11-16, 18:05:43 (24.72.171.222)
Yes, I take pics with the top up 'cause it looks better. When playing, top down. Inhibits dust, doncha know? Don't be bullied by the Golden Ears. My arm clears nicely. I went with the GrooveTracer .......

147: RE: I can relate.... (5.99)
Posted by photoguy on 2007-06-05, 12:41:01 (131.247.57.106)
I've read so many comparisons of aftermarket counterweights for Regas and it seems that what works well for one person doesn't do it for another when using the same rig but different carts. This curre .......

148: RE: GROOVETRACER™ Counterweight for all Rega tonearms (5.97)
Posted by SgreenP@MSN.com on 2007-12-26, 12:31:07 (141.150.122.131)
No not really. By adding weight to both sides of the pivot, you are increasing the resistance for the arm to move in the horizonal plane, whereas, the vertical plane is kept light to accomocate warps. .......

149: Groovetracer over here (5.97)
Posted by OMalley on 2006-05-31, 12:11:37 (65.215.10.1)
. ~Slainte, The OMalley .......

150: RE: A timely article for me (5.96)
Posted by Jive Turkey on 2013-08-24, 18:27:45 (67.161.62.246)
I hadn't thought about that. After shimming my RB-301 up, I put four small adhesive felt dots around the rim edge. The Groovetracer products I've bought have really enhanced the Rega table. Sometimes .......

151: RE: Isn't that Rega RP6 subplatter bearing assembly all stamped plastic ? (5.95)
Posted by ecl876 on 2022-12-11, 13:15:28 (184.61.127.46)
I said that I installed a Groovetracer subplatter in the RP6. Never said the RP6 was advanced engineering. Read more carefully! I was speaking of the very expensive tables. Do you post provocative com .......

152: Here's mine (5.90)
Posted by Jive Turkey on 2013-07-30, 18:17:46 (67.161.62.246)
Rega P3-24, Ortofon 2M Black, nylon spacer (VTA), Qup lifter, 3" Maple Block on raquetballs in furniture cups, lid damped and raised with stick on dots along edge. Forgot...Groovetracer sublplat .......

153: Re: Rega upgrades (5.86)
Posted by Jobman on 2006-09-15, 18:20:33 (75.24.104.142)
FWIW, I second the GrooveTrace products. I have the Counterweight, Acrylic PLatter and Subplatter on my P3, and with my Shelter 501, I don't think anything under $2500 can touch it. Frank is a First C .......

154: RE: Buyer's Dilemma: Upgrade or replace Rega (5.85)
Posted by bacobits on 2011-12-21, 17:32:40 (69.132.107.254)
The P25 is a nice table. I would go for the Motor/TTPS option and then get rid of that Phenolic Sub-Platter replaced with a Groovetracer Sub-platter. That is really the only upgrades the table needs. .......

155: RE: GROOVETRACER™ COUNTERWEIGHT better than stock RB300? (5.85)
Posted by xyyyy on 2008-04-30, 15:37:36 (24.11.183.87)
Better or simply different? Some tables, such as Michell Tecnodecs come w/an RB-250 based tonearm, with a Michell counterweight. They look nice, as do Groovetracters. Personally though, I'd go with a .......

156: RE: bearing (5.82)
Posted by Macromusic on 2012-08-27, 18:59:21 (75.196.71.250)
Thank you for helping LeslyMoreley out with the specifics & experience, for I have never attempted this procedure but I generally knew what to do and will do at some point--perhaps when I upgrade the .......

157: RE: Classic Cartridge for an Older Model dude (5.81)
Posted by El Dante on 2010-02-09, 19:01:23 (24.26.148.96)
oh yeah.. yes, rega hotrodded. (all the groovetracer mods, different platter, tonearm rewired, better feet,) as for me, I also have a hotrodded p2(and a SOTA) but with the audio origami tonearm.. I wo .......

158: RE: what he said.. (5.77)
Posted by xyyyy on 2011-08-05, 15:11:08 (76.20.129.158)
The tungsten counterweight and the groovetracer could be taken along and added to the P5 at a later date. Even if he moved directly to a p5, i would recommend the tungsten counterweight and the gt ref .......

159: RE: Anyone Using The Groovetracer with the Rega RP-6? (5.76)
Posted by dirtyvinyl on 2013-07-06, 10:07:11 (71.104.66.9)
Plenty of info on the vinylengine. IME the sub mandatory, the weight-questionable. With the exception of the best MC cart/phonstage you can afford, I would resist temptation to upgrade anything els .......

160: RE: Rega P7 + DV20XH (5.75)
Posted by Plinko on 2007-12-28, 12:23:10 (24.131.227.251)
I have a P5 and listened to the P7 for the short time the dealer had one. Not big enough leap, imho. And you can always buy the Groovetracer subplatter upgrade and counterweight (if it fits your arm). .......

161: I'd get a cart with the $ (5.75)
Posted by spyderx on 2009-10-09, 15:54:38 (75.142.111.251)
2m Blue. You can take it with you when you upgrade. What cart you using now? The ONLY upgrade I'd consider for a Rega is a higher line Rega. Or the groovetracer subplatter if you have a higher line re .......

162: RE: Rega Planar 25 and Ortofon 2M Question (5.73)
Posted by jimbo900c on 2010-07-23, 05:29:26 (24.236.131.196)
Hi Alan I went with the Groovetracer Acryllic platter.....so I don't use a mat. On the glass platter, I tried the None-Felt, Ringmat Anniversary,and the stock felt. I preferred the Ringmat, slightly o .......

163: RE: Thanks for that (5.72)
Posted by Travis on 2020-04-16, 11:13:24 (24.72.161.172)
It's so easy to be seduced by the Oracle. I had a Delphi Mk1 for about ten years (a friend traded it to me). I finally got tired of the figity suspension and got rid of it. Bought an RP6 and I think i .......

164: RE: rega p5 & acrylic platter (5.71)
Posted by ecl876 on 2019-03-13, 09:27:40 (67.204.159.248)
I have a Rega RP 6 with a glass platter. You might want to browse the Steve Hoffman site. Try search REGA DELRIN PLATTER or google it. From what I've read, it might change the sound somewhat but not n .......

165: Agreed (5.64)
Posted by spyderx on 2009-05-07, 17:10:50 (75.142.111.244)
After fiddling with a bunch of tweaks on my p3/24, I ended up with table type that you always see suggested here (light, rigid) and a replacement sub platter to fix the out of round-ness of the defaul .......

166: LP Gear Vessel A3SV Cartridge (5.62)
Posted by RakeAngle on 2019-02-10, 16:11:32 (68.14.75.213)
I own the Vessel A3SV, and it's a great bargain. Thank you, Rome C. It blew away both my Rega Exact II and Ortofon MM Black. It's on a Rega 3/24 with RB301 arm and full-blown Groovetracer mods. I'm th .......

167: RE: Kinda the same. (5.59)
Posted by Travis on 2014-07-18, 16:25:21 (24.142.64.45)
From early 60's, Garrard changer, AR-XA, Phillips GA-212, B&O 4002, 4004, the revised AR w/ Sumiko arm, Oracle Delphi MKI/Koetsu arm and then, viola, settled on the RP6 and all the GrooveTracer mods w .......

168: RE: A follow-up question? (5.57)
Posted by ecl876 on 2020-04-22, 12:19:07 (67.204.159.248)
No. I did get a Groovetracer subplatter. I forgot whether you had to add oil at the time. But a couple of years ago, I decided to get a second RP6, just in case. None were available in any other color .......

169: Me too (5.57)
Posted by RJeff on 2014-07-19, 19:07:12 (173.79.64.59)
Sort of - I stopped with the P25, which I purchased used in late 2001, but I have actually scaled back with the mods (platter, VTA adjustor, counterweight) and have it running back with the stock plat .......

170: Any thoughts on the Nagaoka mp-500 vs. ... (5.56)
Posted by Jive Turkey on 2013-05-23, 16:59:04 (67.161.62.246)
...Ortofon 2M Bronze and Black? I see NeedleDoctor has the mp-500 back in stock. It's part of the equation as to which way I go soon when my Bronze hits the 1,000 hr. mark. I like the Bronze, and it's .......

171: Re: Deep Grove Subplatter for Rega (P5) - worth it? (5.50)
Posted by xyyyy on 2007-01-15, 14:30:06 (24.11.180.97)
Personally, I don't think adding a different sub platter is worth it. The bearings on the existing P5 sub platter are high quality. IMO, you won't notice a real difference with the sound. Others may d .......

172: Re: so now i know why you sold me your DeepGroove! [nt] (5.48)
Posted by zoltarcat@msn.com on 2006-03-24, 15:20:23 (65.144.34.198)
Ha! No, that is not true. You got the one Deepgroove that I had left. I have to admit, there were a lot of quality control issues with the Deepgrooves that I have owned. (I have owned four). I had som .......

173: RE: Acrylic "reserved dynamics". (5.47)
Posted by bacobits on 2012-09-20, 07:16:41 (75.181.76.126)
Yea there is an alloy option all be it NOT CHEAP! I have the GrooveTracer Delrin on a P5 it is very good. .......

174: Iceni Audio Ltd on another new build. (5.46)
Posted by raya on 2021-04-27, 07:54:00 (24.39.87.154)
The Iceni Audio Ltd. counterweight is in. I am very happy with the chance I took on this little known aftermarket counterweight. The fit and finish are better than the picture on ebay indi .......

175: RE: Rega P3-24/Groovetracer Delrin platter? (5.46)
Posted by AudioSoul on 2013-01-21, 10:51:57 (24.117.206.83)
I had a P25 and mounted a groove tracer sub-platter and black Delrin platter. I was very please with it and sounded way better than the stock Rega platter. It is a different sound however, it's more .......

176: RE: Anyone Using The Groovetracer with the Rega RP-6? (5.44)
Posted by bacobits on 2013-07-07, 17:01:52 (24.74.132.167)
Well not to knock Rega's, I have had 3 and the last one was a P5 maxed out with $1k in upgrades. Sounded great? YES! BUT, it didn't sound as good as my current Clearaudio Emotion CMB, Carbon Satisfy t .......

177: RE: Help me select a new MM for Rega RP6 (5.43)
Posted by Travis on 2019-06-10, 14:54:04 (24.72.161.172)
I agree with Joe Backer. I've had Ortophons off and on for probably forty years and always loved them. The 2M Black on my RP6 had been great in the 4-5 years I've had it, no mistracking, ever, and .......

178: You're right... (5.42)
Posted by VynylTap on 2011-03-21, 19:22:12 (67.197.182.162)
I've been reticent to try anything in the way of an acrylic platter since I didn't care for the Iron Audio on earlier Regas. I haven't liked other counterweights either in past experience although I h .......

179: RE: Cardas tonearm re-wire (5.41)
Posted by Macromusic on 2012-10-16, 10:54:32 (75.233.199.159)
You mentioned this as a worthwhile upgrade a few weeks ago, that advice wasn't lost on me. In general I hesitate to do anything to modify something when it's not needed. Sometime I'll be going to hear .......

180: I use an acrylic mat on my Thorens TD-160 Super. (5.41)
Posted by Quadzilla on 2020-07-06, 07:18:31 (50.101.164.57)
I really like it, and I have tried a number of different ones (like most people have) over the years. Much more life than a soft rubber mat, and more detail than felt. I bought a full acrylic platter .......

181: RE: Aftermarket tweaks for Rega P5? (5.40)
Posted by krenzler on 2009-06-16, 14:03:17 (87.61.174.52)
Have you got the TT-PSU? Have you got the Rega Wall Bracket (RWB)? The Groovetracer subplatter MIGHT be worthwhile for the P5 (see link). I would stay away from the acrylic platter - I suspect it migh .......

182: I found mine to dramatically improve sound. (5.39)
Posted by tubesforever on 2007-02-19, 10:18:42 (151.151.21.103)
Make sure it is offset so the mass is more coincident to the plane of the cartridge. This improves tracking. This is especially important when you have a very heavy cartridge. GrooveTracer allows you .......

183: Kudos to Audio Technica (5.39)
Posted by wsill on 2006-10-27, 18:44:20 (67.191.160.198)
Two weeks ago I posted here that my OC-9 stylus fell off. I mailed the cartridge to Audio Technica per instruction on thier web site. (Thanks Henry for the link) Well today I received a brand new cart .......

184: RE: Pinging Rega P3 owners (5.37)
Posted by D Harvey on 2021-11-10, 08:10:01 (12.228.233.170)
I have no experience with either cart mentioned, so I can't speak to that. I'm using a Hana EL on my P3, and it's very good. I have the GrooveTracer subplatter (the premium version) and it's a major u .......

185: Rega Rega Rega (5.37)
Posted by RJeff on 2014-07-13, 17:54:04 (173.79.64.59)
Vinyl was driving me crazy so I decided to simplify and just try to enjoy listening to records and music instead of listening to my turntable. Rega P25 (Yikes - it's 15 years old.... No. This way lies .......

186: RE: New Turntable (5.35)
Posted by Travis on 2020-04-22, 11:34:14 (24.72.161.172)
You can take a gandy, err, gander at my GrooveTracer pics. My RP6 sounds amazing. I don't know from VPI. In the past I've had Oracle, various AR, Norelco, Phillips, B&O, etc. I also have the Phoenix E .......

187: RE: You can try this one for not much money (5.34)
Posted by thegage on 2011-12-20, 17:46:46 (75.194.52.5)
if you want to experiment. It provides a bit of clamping without the deadening that a firm or heavy clamp brings. I moved to Rega from the VPI world of periphery ring and center weight, so I find it d .......

188: RE: Groovetracer reference subplatter came this morning. (5.30)
Posted by dirtyvinyl on 2014-01-05, 17:58:00 (96.229.240.5)
You've addressed the major weakness with mid level Regas. I've had fun modding a P5 but never bothered with a different platter. I found a cork mat with no weight to be the most realistic sounding. A .......

189: RE: Are you a one turntable, one cart, the best.. or a several TT several cart person? (5.30)
Posted by chili5555 on 2010-04-03, 15:04:59 (66.21.134.183)
A Linn Axis with a CNC'ed top plate mounting an Origin Live Silver and a Denon 103R. Soon to be replaced with...something. Ortofon? Benz? Another Denon? A Rega P25. All stock except for a Groovetracer .......

190: RE: going against my gut... ordered a Groovetracer Acrylic Platter this weekend... (5.29)
Posted by bacobits on 2011-03-21, 07:18:43 (24.74.142.161)
Well......Frank makes nice precision upgrades. Some people here don't think they are upgrades. I have the Ref Sub Platter and Counterweight on a P5 with the TPS. I like it! A lot. I replaced the Rega .......

191: RE: Smart. (5.29)
Posted by Travis on 2017-09-26, 10:40:59 (199.15.106.251)
I'm not really a tweaker so VPI would never be on my list of TT's to pursue. VPI has the unpleasant, for me, possibility of the never ending upgradeitis disease. It obviously works for their custom .......

192: One final point. My opinions on Regas and upgrades thereto (5.27)
Posted by Opus 33 1/3 on 2014-04-30, 17:25:07 (74.214.40.170)
are the result of listening to said "upgrades." I just know what I hear and the only upgrades I've heard that helped were choice of a light rigid stand and re-wiring the tone arm with Cardas wire, in .......

193: RE: GROOVETRACER™ COUNTERWEIGHT better than stock RB300? (5.26)
Posted by krenzler on 2008-05-01, 13:29:14 (83.94.147.86)
"Audio Technica AT-95E: 6.5 x 10 6cm/Dyne" AT specify dynamic compliance measured @ 100Hz (like Denon). You need to approximately double this value to get the compliance @ 10Hz. So 13cu is more likely .......

194: RE: Old Rega P3 : maintenance (5.24)
Posted by zacster on 2017-01-10, 09:21:25 (148.168.96.23)
Remove the center hub and throw it away. Buy a new one from Tangospinner, GrooveTracer or a few others, then lubricate as instructed. At least Tangospinner supplied oil for mine, I don't know if the o .......

195: Rega RP6 compared to Rp8 (5.24)
Posted by saki70 on 2016-09-04, 15:39:06 (173.171.53.137)
I am considering an upgrade of my stock MMF 5.1 . I have been looking at these two tables and wanted to know if anyone has had a chance to listen to both of them and can offer an opinion . The RP8 is .......

196: RE: New turntable decision (5.24)
Posted by Jive Turkey on 2016-09-03, 16:55:16 (50.174.170.128)
Not on your list, but worth mentioning: Pioneer PLX-1000 direct drive Ortofon 2M Black Herbie's mat I forget the Headshell, but it allows more room for screw alignment 3" maple block over raquetbal .......

197: truly (5.23)
Posted by OMalley on 2006-09-16, 05:57:01 (68.44.20.65)
i think i might have got the one good Deepgroove subplatter you had so going with the Groovetracer is something I would do if I were going to buy these mods first timeout. I just read a good way to ge .......

198: RE: I'm one of those Rega owners, actually an "ex". Leave 'er stock (5.17)
Posted by bacobits on 2011-01-15, 08:27:33 (24.74.142.161)
I know Henry, you have gone through a bunch of tables. Naw, the Groovetracer Subplater, bearing is a nice upgrade. White belt with the TTPS too. Ain't cheap! This table beats the hell out of my Basis .......

199: Yes, until quite recently (5.17)
Posted by RJeff on 2011-08-03, 06:29:29 (96.248.93.95)
I thought it sounded much better on my Rega25's glass platter than the stock felt mat did. I recently switched (just for the sake of something different) to a Groovetracer platter, which is meant to b .......

200: RE: Proud moment - daughter's first turntable (5.16)
Posted by Dual on 2014-08-04, 10:50:18 (67.255.222.11)
Congratulations. Back just before Christmas I was able to give my vinyl enthusiast daughter a turntable I kludged together from Rega parts I'd accumulated over time: •Planar 3 plinth and dustcover .......

Found total of 200 records, Query: groovetracer in Vinyl Asylum, Time: 0 sec.

Searches are limited to a maximum of 200 records. Your query returned too many records. Try limiting your search by using the Advanced Search Options below to select an author, a date range, a single forum or more specific search terms.

New Search