|
Cable Asylum: Re: maybe rcrump... I don't know, but... by rcrump Interconnects, speaker wire, power cords. Ask the Cable Guys. |
For Sale Ads |
24.167.44.148
In Reply to: Re: maybe rcrump... I don't know, but... posted by Greg R. on September 29, 2000 at 19:47:48:
Solid core wire is extremely directional so just mark the end with some masking tape as it comes off the spool. Orient the wires so you have piece of masking tape at either end and terminate the wires. Throw it on a MOBIE or whatever overnight and then listen to it noting which way gives the highest image height. This is the correct orientation.If you run the signal and return wires in the same direction you will end up with hot spots in the stage, normally at or close to the speakers, low image height and have a gaping hole in the middle of the stage...Keep in mind I am referring to the sound of the stage (reflections) not the individual instruments spread across the stage....Interconnects or speaker wires that have pianos wandering all over the stage normally have their signal and return going in the same direction....
This post is made possible by the generous support of people like you and our sponsors:
Topic - maybe rcrump... anyone else too... - surround 00:04:09 09/29/00 ( 14)
- Re: maybe rcrump... I don't know, but... - Greg R. 19:47:48 09/29/00 ( 13)
- Re: maybe rcrump... I don't know, but... - rcrump 09/30/00 06:45:41 09/30/00 ( 11)
- Is stranded core directional also? - NickR 11:27:51 10/1/00 ( 5)
- Re: Is stranded core directional also? - rcrump 13:37:27 10/1/00 ( 4)
- Re: Is stranded core directional also? - steve b 18:05:36 10/1/00 ( 3)
- Re: Is stranded core directional also? - rcrump 03:59:51 10/2/00 ( 2)
- Re: Is stranded core directional also?- Pathways. - Greg R. 08:21:21 10/2/00 ( 1)
- Re: Is stranded core directional also?- Pathways. - rcrump 10:23:24 10/2/00 ( 0)
- Re: maybe rcrump... I don't know, but... - surround 20:41:31 09/30/00 ( 1)
- Re: maybe rcrump... I don't know, but... - rcrump 08:15:38 10/1/00 ( 0)
- Re: maybe rcrump... I don't know, but... - Greg R. 09:52:26 09/30/00 ( 2)
- Re: maybe rcrump... I don't know, but... - rcrump 13:59:05 09/30/00 ( 1)
- Is anyone else "Freak Out" by this? - Greg R. 21:14:22 10/1/00 ( 0)
Re: maybe rcrump... I don't know, but... - surround 23:00:38 09/29/00 ( 0)